| BATTERY MONITOR ACCESSORIES |
|
48 Volt Adapter/Lightning Protector (TM-48V): This adapter allows the TriMetric meter to operate with 48 volt systems, and also provides lightning protection for 12-48V systems. It mounts next to the TriMetric terminal block and fits within the box. Choice Of Two Shunts For Use With TriMetric Battery Monitor: These are required for making the "amps" and amp hour measurement as shown in diagram below. 500 amp-50 mV Shunt: For systems with maximum current 400 amps continuous with no overloads, or 300 amps continuous with up to 5 minute overloads to 500 amps max. It allows amp readings as low as 0.1 amps. They are suitable for virtually all systems with moderate or large sized inverters. Size 31/4 by 13/4 inch base, 17/8 inches in height. 100 amp-100 mV Shunt: For systems with maximum current 75 amps continuous with no overloads, or 50 amps continuous with overload to 100 amps for 8 seconds max. These are suitable for small systems, or for most applications where you want to measure only solar or wind input current. It allows "amps" readings as low as 0.01 amps.
Wiremold TM "Double Gang" Box #2348-2:
Cable For Connecting Meter To Shunt: 19020 Two Bar Road Boulder Creek, CA USA 95006 (831) 338-0616 www.bogartengineering.com |
|
MODEL 2020 HOMEPAGE
OPERATION AND SPECIFICATIONS
EXTRA DATA OTHER INFORMATION AND FEATURES |